t4 - lds -0 277 , rev . 1 (12 1354 ) ?201 3 microsemi corporation page 1 of 6 1n6103a C 1n6137a available on commercial versions v oidless h ermetically s ealed b idirectional t ransient v oltage s uppressors qualified to mil - prf - 19500/ 516 qualified levels : jan, jantx, jantxv and jans * description this series of industry recognized voidless, hermetically sealed bidirectional t ransient voltage suppressor s (tvs) is military qualified to mil - prf - 19500/516 and is ideal for high - reliability applications where a failure cannot be tolerated. they provide a working peak standof f voltage selection from 5. 7 to 152 v olts with a 500 watt rating for a 10/1000 s pulse . they are very robust in hard - glass construction and use internal category 1 metallurgical bond s . these devices are ava ilable as both a non - suffix part and an a version providing different voltage tolerances as described in the nomenclature section. these devices are also available in a surface mount melf package configuration. b package also available in : b sq - melf package (surface mount) 1n6103 us C 1n6137 us important: for the latest information, visit our website http://www.microsemi.com . feat ures ? high surge current and peak pulse power provides transient voltage protection for sensitive c ircuits . ? triple - layer passivation . ? internal category 1 metallurgical bonds . ? voidless hermetically sealed glass package . ? jan, jantx, and jantxv qu alified versions are available per mil - prf - 19500/ 516. ? * jans available for 1n6103 (a) thru 1n6118 (a) per mil - prf - 19500/516 as well as further options for screening in reference to mil - prf - 19500 for all others in this series . (see part nomenclature for all available options.) ? rohs compliant versions available (commercial grade only) . applications / benefits ? military and other high - reliability applications. ? extremely robust construction. ? extensive range in w orking p eak s tandoff v oltage (v wm ) from 5.7 to 152 volts. ? 500 w att p eak p ulse p ower (p pp ) for a 10/1000 s pulse . ? esd and eft protection per iec6100 -4- 2 and iec61000 -4- 4 respectively . ? protection from the secondary effects of lightning pe r select levels in iec61000 -4- 5. ? flexible axial - leaded mounting terminals . ? non - sensitive to esd per mil - std - 750 m ethod 1020 . ? inherently radiation hard as described in microsemi micronote 050 . maximum rat ings @ t a = 25 o c unless otherwise noted msc C law rence 6 lake street, lawrence, ma 01841 tel: 1- 800 - 446 - 1158 or (978) 620 - 2600 fax: (978) 689 - 0803 msc C ireland gort road business park, ennis, co. clare, ireland tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: www.microsemi.com parameters/test conditions symbol value unit junction and storage temperature t j and t stg -5 5 to + 175 o c thermal resistance junction - to - lead (1) r ? jl 33.5 o c /w peak pulse power @ 25 oc (10/1000 s) p pp 500 w steady - state power @ t l = 75 o c (1) p d 3.0 w steady - state power @ t a = 25 o c (2) p d 2.0 w impulse repetition rate df 0.01 % solder temperature @ 10 s t sp 260 o c notes : 1. at 3/8 inch lead length from body . 2. steady - state power ratings with reference to ambient are for pc boards where thermal resistance from mounting point to ambient is sufficiently controlled where maximum rated t j is not exceeded (also see f igure 4 ). downloaded from: http:///
t4 - lds -0 277 , rev . 1 (12 1354 ) ?201 3 microsemi corporation page 2 of 6 1n6103a C 1n6137a mechanical and packaging ? case: hermetically sealed voidless hard gla ss with t ungsten slugs . ? terminals: axial - leads are t in/ l ead over c opper. rohs compliant matte -t in is available on commercial grade only. ? marking: body paint and part number . ? polarity: no polarity marking for these bidirectional tvss . ? tape & ree l option: standard per eia - 296. consult factory for quantities. ? weight: approximately 750 m illigrams . ? see p ackage d imensions on last page. part nomenclature applicable to entire series: jan 1n6103 a (e3) reliab ility level jan = jan level jantx = jantx level jantxv = jantxv level blank = c ommercial jedec type number see electrical characteristics t able rohs compliance e3 = rohs c ompliant ( available on commercial gra de only ) blank = non - rohs c ompliant voltage tolerance a = standard blank = 5% higher v c , 5% lower min. v (br) and 5% lower i pp applicable to 1n6103 (a) thru 1n6118 (a) only: jans 1n6103 a reliability level jans = jans level jedec type number see electrical characteristics t able voltage tolerance a = standard blank =5% higher v c , 5% lower min. v (br) and 5% lower i pp applicable to 1n6119 (a) thru 1n6137 (a) only : msp 1n6119 a (e3) reliability leve l msp (reference jans) jedec type number see electrical characteristics t able rohs compliance e3 = rohs c ompliant blank = non - rohs c ompliant voltage tolerance a = standard blank =5% higher v c , 5% lower min . v (br) and 5% lower i pp downloaded from: http:///
t4 - lds -0 277 , rev . 1 (12 1354 ) ?201 3 microsemi corporation page 3 of 6 1n6103a C 1n6137a symbols & definitions symbol definition v ( br) minimum breakdown voltage: the minimum voltage the device will exhibit at a specified current. v wm working peak voltage: the maximum peak voltage that can be applied over the operating temperature r ange. this is also referred to as s tandoff v oltage. i d maximum standoff current: the maximum current that will flow at the specified voltage and t emperature. v c maximum clamping voltage at specified i pp (peak pulse current) at th e specified pulse conditions. p pp peak pulse power: the peak power dissipation resulting from the peak impulse current i pp . electrical characteristics industry type number (note 1 ) minimum breakdown voltage (note 1 ) v (br) @ i (br) rated sta ndoff voltage v wm maximum standby current i d @ v wm maximum clamping voltage (note 1 ) v c @ i pp maximum peak pulse current (note 1 ) i pp maximum temp. coef. of v ( br) v (br) volts ma v a volts amps %/ o c ? 1n6103a 7.13 175 5.7 50 11.2 44.6 .06 ? 1n6104a 7 .79 150 6.2 20 12.1 41.3 .06 ? 1n6105a 8.65 150 6.9 20 13.4 37.3 .06 ? 1n6106a 9.50 125 7.6 20 14.5 34.5 .07 ? 1n6107a 10.45 125 8.4 20 15.6 32.0 .07 ? 1n6108a 11.40 100 9.1 20 16.9 29.6 .07 ? 1n6109a 12.35 100 9.9 20 18.2 27.5 .08 ? 1n6110a 14.25 75 11.4 20 21.0 23.8 .08 ? 1n6111a 15.20 75 12.2 20 22.3 22.4 .08 ? 1n6112a 17.10 65 13.7 1 25.1 19.9 .085 ? 1n6113a 19.0 65 15.2 1 27.7 18.0 .085 ? 1n6114a 20.9 50 16.7 1 30.5 16.4 .085 ? 1n6115a 22.8 50 18.2 1 33.3 15.0 .09 ? 1n6116a 25.7 50 20.6 1 37.4 13.4 .09 ? 1n6117a 28.5 40 22.8 1 41.6 12.0 .09 ? 1n6118a 31.4 40 25.1 1 45.7 10.9 .095 1n6119a 34.2 30 27.4 1 49.9 10.0 .095 1n6120a 37.1 30 29.7 1 53.6 9.3 .095 1n6121a 40.9 30 32.7 1 59.1 8.5 .095 1n6122a 44.7 25 35.8 1 64.6 7.7 .095 1n6123a 48.5 25 38.8 1 70.1 7.1 .095 1n6124a 53.2 20 42.6 1 77.0 6.5 .095 1n6125a 58.9 20 47.1 1 85.3 5.9 .100 1n6126a 64.6 20 51.7 1 97.1 5.1 .100 1n6127a 71.3 20 56.0 1 103.1 4.8 .100 1n6128a 77.9 15 62.2 1 112.8 4.4 .100 1n6129a 86.5 15 69.2 1 125.1 4.0 .100 1n6130a 9 5.0 12 76.0 1 137.6 3.6 .100 1n6131a 104.5 12 86.6 1 151.3 3.3 .100 1n6132a 114.0 10 91.2 1 165.1 3.0 .100 1n6133a 123.5 10 98.8 1 178.8 2.8 .105 1n6134a 142.5 8 114.0 1 206.3 2.4 .105 1n6135a 152.0 8 121.6 1 218.4 2.3 .105 1n6136a 171.0 5 136.8 1 24 5.7 2.0 .110 1n6137a 190.0 5 152.0 1 273.0 1.8 .110 ? also available in jans qualification per mil - prf - 19500/516. notes: 1. part number without the a suffix has 5% higher v c , 5% lower minimum v (br) , and 5% lower i pp . downloaded from: http:///
t4 - lds -0 277 , rev . 1 (12 1354 ) ?201 3 microsemi corporation page 4 of 6 1n6103a C 1n6137a graphs pulse time (t p ) f igure 1 peak pulse power vs. pulse time junction temperature (t j ) in c figure 2 peak pulse power vs t j (prior to impulse) peak pulse power (p pp ) max peak pulse power (p pp ) or current (i pp ) in percent of max ratings downloaded from: http:///
t4 - lds -0 277 , rev . 1 (12 1354 ) ?201 3 microsemi corporation page 5 of 6 1n6103a C 1n6137a graphs time (t) in milliseconds figure 3 pulse wave form t a (c) (ambi ent) figure 4 temperature - power derating curve pulse current (i pp) in percent of i pp dc operation maximum rating (w) downloaded from: http:///
t4 - lds -0 277 , rev . 1 (12 1354 ) ?201 3 microsemi corporation page 6 of 6 1n6103a C 1n6137a package dimensions ltr d ime n si ons not es i nc h es m illime ters min max min max bd 0 .085 0 .140 2.16 3.56 3 bl 0 .140 0 .185 3.56 4.70 ld 0 .026 0 .033 0.66 0.84 ll 1.00 1.30 25.40 33 . 02 l1 - 0 .030 - 0.76 4 sc hemati c sy m bo l notes: 1 . d imension s are in inches . 2 . m illime ters are gi ven for gene ral in for ma t io n onl y. 3 . dimension bd shall be measured at the largest diameter . 4 . dimension l1 lead diameter uncontrolled in this area . 5 . in acco r danc e wi th asme y 14 .5m, diame ters are equi v alen t to x sy mbolog y. downloaded from: http:///
|
